:::: MENU ::::

Best Free Photo and Image Editor

  • GIMPHOTO is FREE OPEN SOURCE

  • GIMPHOTO is STABLE and SOLID

  • GIMPHOTO is PHOTO EDITOR

 

205 comments:

  1. i d like to get the toolbox always on top. but even when i set up the pref it s still don t work.
    Its under windows

    ReplyDelete
    Replies
    1. Bugs ~ Gimphoto - Photoshop Alternative Photo Editor >>>>> Download Now

      >>>>> Download Full

      Bugs ~ Gimphoto - Photoshop Alternative Photo Editor >>>>> Download LINK

      >>>>> Download Now

      Bugs ~ Gimphoto - Photoshop Alternative Photo Editor >>>>> Download Full

      >>>>> Download LINK jL

      Delete
  2. well, i start it up, and it goes fine until it gets to font, and it crashes... any help?

    ReplyDelete
  3. Not really a bug, but when I looked for the exposure-blend plugin I had to open an image first. Since this plugin doesn't use the open image but instead asks which three images to open it seems it would be better back at it's old location

    ReplyDelete
  4. When i run, i get the message 'Failede to run Gimphoto' and then it's over ... (i installed Gimpad)

    ReplyDelete
  5. lennart,
    first you must install GimPhoto 1.4.3 and then install GimPad 1.1, after that run GimPad 1.1.

    ReplyDelete
  6. GimPad doesn't work :(
    I installed GimPhoto 1.4.3 and then GimPad 1.1. I can run directly GimPhoto and it behaves and looks like GIMP. But when I run GimPad instead (to get the windows hosted on a large main window like in Photoshop) a large empty window of GimPad appears and it launches GimPhoto. But the GimPhoto windows don't get hosted on the GimPad one, they still stay separate as without GimPad.
    The GimPad window doesn't seem to offer any features, there are only two small rolldown menus to change theme and with help (not much helpful though). Furthermore I can't exit GimPad so I have to kill it.
    I already have GIMP 2.2 installed and it looks as usual after the installation of your two programs, may it be that they somehow collide with normal GIMP? Is it necessary to uninstall GIMP? I really don't know what is wrong.

    And I have also a question concerning GimPhoto: is it compatible with all stuff (brushes, textures, plugins, whatever...) available for GIMP and does it have all its functions? I wouldn't like to replace GIMP with something not so well supported just to have a more Photoshop-like interface, which as you see I can't get working anyway...

    ReplyDelete
  7. Don't run GimPhoto, just run GimPad, GimPad will automatically run GimPhoto and when GimPhoto loading, wait until it's completely loading, don't swicth to other apps when GimPad loading GimPhoto.

    there is possibility Gimp 2.2 is conflict with GimPhoto, try to install using different user.

    GimPhoto is 100% compatible with GIMP.

    GimPhoto only tested with Windows 2000 and Windows XP.

    ReplyDelete
  8. I launch GimPad 1.1 and open a gimp xcf file using the Gimphoto toolbar, yet the file opens outside Gimpad!?!?! Gimpad is literally a huge blank window on my desktop at this point instead of a place holder for image files.

    I am working under Windows XP, using GimPhoto 1.4.3.

    ReplyDelete
  9. sosage,
    GimPad 1.1 is external app that try to host all GimPhoto window, there is many possibilities that can make this fail, these some thing that make the trouble:
    - Run GimPad 1.1 (don't run GimPhoto)
    - Wait until GimPad and GimPhoto loading process finished (don't switch to other window in the loading process)
    - Don't use "Transients Window" feature that usually used to bring "Always on Top" in GimPhoto.
    - Don't run GimPhoto with other version of GIMP (because GimPhoto still use the same preferences folder used by GIMP), after uninstall GIMP also do manually clean old GIMP preferences under Document and Settings before install GimPhoto.
    - There is possibility when other software that prevents GimPad to become parent of GimPhoto, usually this program change how window normally act under Windows.

    ReplyDelete
  10. Cannot quit GimPad application. Need to end task in Task Manager.

    ReplyDelete
  11. anonymous,
    sorry, but are you using Vista? GimPad is not compatible with Vista, GimPad only tested and supported for Windows 2000 and XP, because i don't have Vista.

    ReplyDelete
  12. Nope, XP. Tried it on two XP machines actually. Same thing happens on both.

    ReplyDelete
  13. anonymous,
    may be you close it using [X] button at title bar, try close it using menu from GimPhoto or from GimPad. Please be specific with you step to close GimPad maybe there is a bug and i will try to fix it. Thanks.

    ReplyDelete
  14. Hey cool guy. Thanks for this program. Well, Gimphoto gets very slow and crashes when i use it for a long time. What is causing that? PLEASE HELP. Maybe its just my computer but it doesnt happen with anything else.

    ReplyDelete
  15. anonymous,
    do you use GimPhoto with GimPad or only GimPhoto? if you use with GimPad then try to use it without GimPad, maybe the bugs is in GimPad.

    but if you use only GimPhoto then maybe the bugs is from GIMP 2.4.3 that used by GimPhoto 1.4.3 then wait the next version of GimPhoto 1.4.5 that based on more stable GIMP 2.4.5.

    ReplyDelete
  16. Hi,

    This is starting to look fantastic!

    Running WinXP and I also encounter a problem in that I can not close GimpPad. The only way I can close it is to kill the process in taskmanager.

    Keep going as this is shaping up to be a killer app.

    ReplyDelete
  17. anonymous,
    please explain step by step what do you do before encounter a problem, i hope i can fix it.

    maybe when you close GimPhoto try using menu File > Exit.

    ReplyDelete
  18. Thanks for the great app,

    I installed it on my Xubuntu box and it worked ok for a day but then the next day when I wanted to open a jpg I got this error

    Plug-in crashed: "jpeg"
    (/usr/local/gimphoto/lib/gimp/2.0/plug-ins/jpeg)

    The dying plug-in may have messed up GIMP's internal state. You may want to save your images and restart GIMP to be on the safe side.

    no matter how many open or close it I get the same error each time (same for gifs) I tried uninstalling it and reinstalling it but no luck.
    Any ideas?

    Also I was wondering if there is Gimpad for linux yet?

    thanks again

    ReplyDelete
  19. samten sherab,
    what Xubuntu version do you use? is GIMP still exist in your system? is your GIMP running well? i think the problem is GimPhoto is accessing GIMP plugins which not compatible with GimPhoto (maybe your GIMP is version 2.4.5 and GimPhoto is based on GIMP version 2.4.3)

    this can be happen because GimPhoto is still using the same user preferences folder with GIMP (browse your home folder, from Nautilus enable "Show Hidden File" then it will be show folder .gimp-2.4) Please try to rename it to other name or delete it, then try to run GimPhoto again.

    i everyday using GimPhoto for Linux under Linux Mint Daryna (without GIMP) and also under Ubuntu Hardy Heron (with GIMP) without trouble.

    GimPad is using specific Win32 API tricks to grab all GimPhoto windows and manage it as single user interface, for Linux i must develop it from scratch and i don't if it possible or not.

    ReplyDelete
  20. It seams that the layers, chanels, paths etc-window is not captured in mdi. please fix :)

    ReplyDelete
  21. Anonymous,
    are you already read the GimPad help file? for now GimPad only can detect 2 panel (toolbox and tool options panel), this because GimPad is external app from GimPhoto so every second GimPad is checking those 2 panel position and manage it to ensure it's always on top.

    Every additional panel will be burden the GimPad for additional checking code then it will result slower GimPhoto performance.

    For next GimPad version, i consider to add 1 additional custom panel, maybe... :)

    ReplyDelete
  22. Hi I got it working :-)

    I tried uninstalling gimp deleting all gimp usr config files but nothing worked.

    In the end I tried the the shell script gimphoto.sh and it worked fine.

    Thanks again for for this porg!

    ReplyDelete
  23. BackDoor.Generic10.KJH is found in the current release of GimPhoto while using the latest AVG AntiVirus Free (program version: 8.0.169; virus database version: 270.7.3/1691). Could you possibly contact with the AVG Developers and make some explanations? Thx in advance ;-)

    ReplyDelete
  24. Anonymous,
    i'm sorry but i only can responsible for files at Google Code or Tuxfamily, other than that maybe you can contact site admin about the problems, thanks.

    i use Avast and GimPhoto installer at Google Code is free from virus.

    ReplyDelete
  25. @zenith: Avast seems to suck big time; it was my fav but after i installed bit defender i found more than 400 viruses at the pc i use at work (home i run only linux).

    ReplyDelete
  26. Dread Knight,
    Avast by default enable all module, try to enable only Standard Shield and Web Shield (from Avast Resident Scanner > Details...)

    Bit Defender is a very good if not the best av but it only free for on demand scanner and for real time scanner we must paid it.

    so i think for free real time av protection, Avast is good enough and the real competitor is Avira but it has disturbing popup banner.

    ReplyDelete
  27. OS: Windows XP

    I keep getting a large number of errors when starting up GimPhoto. they are basically the same error just with different files. Heres an example of one of them

    "selection-to-path.exe - Entry Point Not Found"
    "The procedure entry point g_assertion_message_expr could not be located in the dynamic link library libglib-2.0-0.dll"

    also is it normal for GimPad to also embed running instances of Pidgin into it along with GimPhoto?

    ReplyDelete
  28. Ok got it to work, I had it installed on a drive other than the C drive, I went and reinstalled it onto the C drive and its working now.

    How ever the whole Pidgin embedded into GimPad is still there and.. its a little annoying..

    ReplyDelete
  29. Sora Chan,
    i'm really sorry about the bugs but i never use Pidgin, under Windows i use Trillian. i think Pidgin also use GTK then GimPad maybe think Pidgin is also as a part of GimPhoto which also use GTK for Windows.

    Thank's for the info, controlling GTK applications under Windows is very complicated, if possible then i will try to fix it in the next release of GimPad.

    ReplyDelete
  30. It won't run. :(

    The installer said it successfully installed GimPhoto, but it won't run. I get this error message:

    symbol lookup error: ./gimphoto: undefined symbol: g_once_init_enter_impl

    I did not uninstall GIMP first; my GIMP version is 2.2; I did rename ~/.gimp-2.2 to something else.

    Any ideas?

    ReplyDelete
  31. SmartAssProducts,
    GimPhoto is running well using Ubuntu 8.04 and Linux Mint 5.0, but if you use Ubuntu 7.10 then you need to install newer version of libgtk (i can run GimPhoto using Linux Mint 4.0 that based on Ubuntu 7.10).

    What Linux distro do you use? maybe there is dependencies problem with your GimPhoto installation because GIMP 2.2 is using older version of libraries files than version that needed by GimPhoto.

    ReplyDelete
  32. Hi!!

    I have Ubuntu 8.04 64bit and I got the following error:

    "error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory"

    I tried the locate command, and I have this library installed, so i create symlink. Now the error is:
    error while loading shared libraries: libdbus-glib-1.so.2: wrong ELF class: ELFCLASS64

    64bit Class...

    Is there a plan to create a 64bit package??

    Thanks!!

    ReplyDelete
  33. Is there any way you can fix the bug that deletes all the exif data when you use GimpPhoto to edit a photo? When you change the file type it also deletes the exif. This is important information and along with keywords needs to be saved in the process.

    Thanks, pam

    ReplyDelete
  34. Pam,
    actually GimPhoto should preserve exif data, when saving JPG try to check Advanced Options > Save Exif, maybe you disable it and you can also use exiftool to save your exif data before editing and put it back after editing.

    ReplyDelete
  35. Watttana,
    i'm really sorry but there is no plan for 64bit package, this because i don't have 64bit system and i have very limited resources to support another platform.

    ReplyDelete
  36. Sorry, when you save a jpeg to a tif or any other extension the exif data is lost. I'll try the exiftool

    thanks, pam

    ReplyDelete
  37. OS: Windows XP MCE
    I was running into the problem where GimPad would not close and where the GimPhoto windows were not being captured by GimPad. Also the problem where GimPad would not close and I had to kill it from task manager.

    I had tried uninstalling and reinstalling, and it hadn't worked. I use to have Gimp 2.4.7 installed.

    I uninstalled GimPad and GimPhoto (in that order), renamed the c:\documents and settings\username\.gimp-2.4 folder, then reinstalled GimPhoto and GimPad (in that order).

    It now works properly. I believe it was some sort of conflict with the Gimp2.4 settings that were not removed during the uninstall.

    ReplyDelete
  38. Killermonk,
    Thank you very much for very useful tips! I will include your tips to Installation instructions.

    Many users already reported the problem like your experience but i can't re-produce it at my computer then i confuse about what make the problem because without knowing the cause, i can't find the solution.

    Your tips very valuable for other users, thanks for sharing it with us! (^___^)=b

    ReplyDelete
  39. Does this thing open psd's?

    ReplyDelete
  40. dear all expert, need help
    I use Win xp home edition SP2, but gimp-2.6.2 cannot run with even smoothtly installation has been done, with massage as follow

    gimp-2.6.exe has encountered a problem and needs to close.

    ReplyDelete
  41. Anonymous,
    sorry but this site is only for GimPhoto support, for GIMP 2.6.2 support, try http://www.gimp.org or http://www.gimptalk.com.

    ReplyDelete
  42. Latest stable GimPad and Gimphoto will not save locations of windows. I have "Save window locations on exit." checked and even did the "Save current window locations" button. It always resets them when I restart it all.

    ReplyDelete
  43. Anonymous,
    if you want to save window locations, do:
    1. run GimPhoto (not GimPad).
    2. save window location via Preferences.
    3. exit GimPhoto.
    4. run GimPad (not GimPhoto), i hope this works :)

    ReplyDelete
  44. It sounded like that might work, but it didn't. :(
    When I run Gimpad I see the Gimphoto windows in the saved positions for a second, then they get moved back to default position.

    If I run Gimphoto by itself, the windows are still saved. So the culprit is Gimpad, I presume.

    ReplyDelete
  45. Daemon,
    yes, for now GimPad still doesn't save windows location.

    ReplyDelete
  46. Hello.
    Ek kian Thank you for Gimphoto!

    Not sure if it is a bug. Anyway due to this issue Gimphoto is almost not usable for me: after i follow installation instructions carefully, i launch gimphoto and see awful GUI font (screencapture: http://img411.imageshack.us/img411/2188/settingsvm4.png ). I cannot find a way to adjust (at least) it's size. Is that possible?

    Gimphoto v1.4.3 for Linux.
    Ubuntu 8.10 x32.
    Monitor resolution 1152 x 864.
    nVidia GeForce4 MX 440 (powered by nVidia 96 driver)


    Please help.

    ReplyDelete
  47. SS-27,
    - run Terminal
    - type:
    sudo gedit /usr/local/gimphoto/share/gimp/2.0/themes/Default/gtkrc
    - sudo will ask admin/root password

    - after gtkrc file opened, change line:
    font_name = "Nimbus Sans L Condensed 10"

    - that line means GimPhoto is using font Nimbus Sans L Condensed with size 10.
    - change font type or size, save file then run GimPhoto

    i usually using font DejaVu Sans Condensed with size 9 (this font is good because all panel tabs text is visible)

    ReplyDelete
  48. zenith,

    thank you very much. I left Nimbus Sans L Condensed but with size 14. Sorry for 'awful' in my previous message - that was result of frustration...
    You know, i always use large fonts everywhere (usually i cannot work with fonts smaller than size 14).

    Take care.
    My best regards.

    ReplyDelete
  49. I have Gimp 2.4 installed on my laptop.Everytime I use Gimpad/Gimphoto,I get stuck...the fan start turning max speed and there's no way to stop the program except for shutting down the computer.

    ReplyDelete
  50. Anonymous,
    GimPhoto and GimPad can't live side by side with GIMP 2.4 (try to install GimPhoto and GimPad as different user under Windows to be able using GIMP with GimPhoto)

    this happen because GimPhoto using the same user preferences that also used by GIMP, so GIMP user preferences will ruin GimPhoto and GimPad (the most trouble is came from "Transient Windows" features at GIMP user preferences)

    ReplyDelete
  51. GimPhoto - 1.4.3 for Windows (XP SP3)
    GimPad - 1.1 for Windows

    Whenever I try to even open Filters/Lighs and Shadow/Gradient Flare I get the "gflare.exe - Application Error" window on any picture.

    ReplyDelete
  52. Velja,
    thank's for the bugs info.
    i can reproduce the error but sorry, i didn't know how to fix it :)

    because all plugins code is 100% original from GIMP.
    i only change plugins menu locations so i hope this error will gone when i upgrade GimPhoto to GIMP 2.4.5

    ReplyDelete
  53. A comment system is not an issue tracker - you should use your google code tracker for bugs and suggestions.

    ReplyDelete
  54. Anonymous,
    thank's for your suggestions.

    i know comment system is very limited as bugs tracking system but so far only small number of error has been reported and the bugs is mainly derived from gimp that i can't fix it, so i thought that very simple bugs reporting system is enough :)

    ReplyDelete
  55. "Slice for web" does not work. It gives an error with the default values.
    >
    Error while executing
    (script-fu-webotine 1 23 "." "layout.html" "layout-img" "" 0 0 2 FALSE FALSE)

    Error: set!: unbound variable: html-file

    ReplyDelete
  56. Anonymous,
    Thank's for your info about "Slice for Web" bug!

    I already fix it, try follow steps from this post:
    http://www.gimphoto.com/2009/03/bug-fix-slice-for-web.html

    and tutorial for using "Slice for Web" will follow.

    ReplyDelete
  57. wavetraced30/3/09 2:48 AM

    You're hard work is greatly appreciated, I strive to get my friends who use stolen sotware to use what is legal and this is one more tool.

    But, Gimpad/Gimpshop is not stable at all. These bugs came up on both the initial install and then a clean install. Even when set in preferences, window positions don't stick, the palette window disappears when I try to adjust size of toolbar on left and the program won't quit either with X or through Exit. I have to end the process. Plus, my tablet's pen isn't pressure sensitive. hmph.

    The sooner GIMP gets away from the windowed interface the better. Why wasn't it fixed in GIMP 1.1?

    WinXP | HP Compaq tc4200 | 1.5G RAM

    ReplyDelete
  58. wavetraced,
    Thank's for kind words :)

    ahem...this is GimPhoto not Gimpshop :)

    maybe you ever install GIMP 2.4.x?
    there is user preferences folder that will exist even you already uninstall it, this the main cause that your Gimpad and GimPhoto NOT working ok.

    for your problems with GimPad/GimPhoto, there is 3 possibilities that cause the troubles:

    1. GimPhoto and GimPad CAN NOT be installed side-by-side with GIMP.

    2. There is old GIMP preferences that still exists on your computer (even uninstall GIMP will not remove this preferences) so we must remove it manually, follow this instructions:
    for 2K/XP users
    - please check under C:\Documents and Settings\(Your_User_Name)\
    - DELETE or RENAME folder .gimp-2.4 or .gimp-2.2
    for Vista users
    - please check it under C:\Users\(Your_User_Name)\
    - DELETE or RENAME folder .gimp-2.4 or .gimp-2.2
    (mostly error happened because of this)

    3. GimPad will into much trouble if "Transients Windows" feature is ON (this a "Always on Top" feature that usually used by GIMP), so DISABLED it because GimPad that will take care "Always on Top feature".

    Some more information about your problems:

    - Gimpad still can't saving windows position (this will fixed at GimPad next version 1.2)

    - Your tablet isn't pressure sensitive because GIMP 2.4.3 error and GimPhoto 1.4.3 based on this version of GIMP (this will fixed at GimPhoto next version 1.4.5 using GIMP 2.4.5)

    - GIMP will always using windowed interface because GIMP depend on GTK+ that until now still NOT supporting MDI windowing interface. This way i create GimPad by myself to bring MDI like interface at GimPhoto.

    ReplyDelete
  59. wavetraced3/4/09 9:57 PM

    My sincere apologize for calling it GimpShop, i got my programs confused. Before posting last time, I did a complete uninstall of GIMP, deleted the hidden settings and deleted all references to GIMP in my registry. I will try the transients window.

    Thanks again, and that you took the time to respond to my issue.

    ReplyDelete
  60. This is a great package.

    BUT Gimpad fails to start for a limited user (works fine on the admin account), giving an error each time "gimpad.exe has encountered a problem and needs to close. We are sorry for the inconvenience." and then sends an error message

    ALSO BUT - GimPhoto is really good, but I have to use a mouse. My Grapphire 4 tablet is jerky and unresponsive.

    Using WinXP SP3 on a completely new system.

    ReplyDelete
  61. Anonymous,
    GimPhoto 1.4.3 still has a problem with tablet that because it based on GIMP 2.4.3 that has bugs with tablet support, just wait for GimPhoto next version that based on GIMP 2.4.5 which has better tablet support.

    GimPad is using extensively Win32 window management API, maybe there are functions that used by GimPad that require admin level user.

    You can try to using GimPhoto Portable with GimPad Portable, maybe it can be used with limited user account, just follow this link:
    http://www.gimphoto.com/2009/05/gimphoto-143-portable-released.html

    ReplyDelete
  62. The Gimphoto 1.4.3 installer clobbered my system path instead of appending
    "C:\Program Files\GimPhoto 1.4.3\bin;C:\Program Files\GimPhoto 1.4.3\lib\gimp\2.0\plug-ins"

    A rather annoying problem...

    ReplyDelete
  63. john,
    sorry but that system path is required by GimPhoto to be able to find executable and plug-ins files location.

    ReplyDelete
  64. Thanks thanks so much for all the hard work you put into things like this! I highly appreciate it. My family doesn't have a lot of money so i cant afford the most high tech computers or super expensive software like most people so things like this are a blessing.

    I only have one problem, when I start it up everythings fine until its past the loading screen then the tool window pops up. Its all white and then it crashes i get the "GimPhoto has encountered a problem and needs to close ect." window. Have had Gimpshop on my comp both the original and upgraded. I have had Gimp 2.6 although it has never worked. I have purged my computer of these files though and any they left behind. BUT right before i found this I downloaded gimp 2.6 although it still didnt work so i uninstalled it, and i went back to "C:\Program files" but nothing was there. So i assumed its was all gone. I have a Windows XP professional 2002 SP3 model. With Very little Memory. -_-'

    please help me I really want to use this program.

    ReplyDelete
  65. ^SAME PERSON~

    I have now tried deleting all the files again, Still just opens the tool window> its all white> and then error report> crash (o-_-)p

    Please help!

    ReplyDelete
  66. Anonymous,
    Thanks for your kind words :)

    do you use GimPhoto with GimPad? or you only use GimPhoto?
    There is many possiblities that cause the problem:
    GimPad is need to be use with admin login, it can't be run with user login.
    GimPad is NOT compatible with GIMP setting called "Transient Windows" that usually used to make toolbox always on top (delete all GIMP 2.4 old settings - even you already uninstall GIMP, the settings is still there - you need to delete it manually)

    for easier solution, try using GimPhoto Portable.

    ReplyDelete
  67. Gimphoto won't install on 64bit Ubuntu 9.04 Jaunty ... at least not with a .deb package installer. That's bad for anyone who's not used to working with a terminal.

    ReplyDelete
  68. I was finally able to install the standard Linux GimPhoto Package with the MD5 checksum ... but can't work with *ANY* images !!! Such a shame, it all started out so promising.

    First I uninstalled the Gimp from my system ... never even used it. Then I checked in the terminal, to make sure that the setup message was okay ... and it was. Went ahead and used the right click option to view the setup file properties and "enabled as application" per your instructions. No problem there either !!! Double-clicken on the setup file ... setup went perfect. Opened up the GimPhoto programm from within Nautilus, and that too worked perfectly. I was very impressed by what I saw ... made adjustments in the preferences section. Got finished, saved everything, and just to be safe ... closed the programm.

    I then re-opened GimPhoto, this worked very nicely. Tools & Windows were where I wanted them. However, when I tried to work with images ... NOTHING would open !!! I tried .gif images, .bmp images, .jpg images, and .png images. I received the same error for every single image - even though some of them could be viewed in the preview window !!! Message was:

    "File blah blah blah failed to open ... unknown file type"

    Also, none of my images would show up at all in order to be selected, unless I used the option for viewing all file types. If I used the option for all images ... NONE of the images would show. Is it possible that this has something to do with the fact that I'm using 64bit Ubuntu as opposed to the 32bit Version? Can you fix this problem? Feel free to email me directly, here:

    siegfried -AT- niederrad -DOT- net

    I would love to be able to use this software !!!

    ReplyDelete
  69. siegfried,
    sorry because i don't have 64bit system then i can't create installer for 64bit system.

    ReplyDelete
  70. Wouldn't you be able to create a 64bit installer if you installed a separate version of 64bit Ubuntu 9.04 on your computer? It's free, all you'd have to do is to download the iso from the ubuntu website.

    There's also a "force" command that can be utilized in order to force the installation of 32bit linux/ubuntu software to work on a 64bit system. However, your instructions don't cover this either ... or at least that won't work ... ???

    From a business sense, would it not be a smart thing, to enable GimPhoto to work on 64bit systems since everything is already being ported to 64bit since several years? (Linux Debian, WinXP, WinVista, etc.)

    ReplyDelete
  71. siegfried,
    is Ubuntu 64bit can run on AthlonXP 1.8? or can we run it using VMware or Virtualbox?

    Linux is new development environment for me, even create Debian package (deb) i still can't do it :( sorry.

    actually i would be very happy if i can also provide 64bit package installer but my hardware and my knowledge for now is limited to 32bit system.

    ReplyDelete
  72. Sorry, no, Ubuntu 64bit will not run on an Athlon XP1800+ System because that particular AMD processor (CPU) is still a 32bit version. I think the 64bit AMD processors didn't start until the XP3000+ came out (could be wrong though). But even those processors have been around for the past 4 years or so.

    As far as VMware / Virtualbox is concerned, I don't know anything about those things. What's weird is the fact that 32bit software should work on a 64bit processor/ubuntu system since 64bit is supposed to be *BACKWARD* compatible. But when I tried to install GimPhoto with the ..... sudo dpkg --force-architecture -i ..... option the software would not work, even though the installation itself completed without a problem. If we could just figure out how to make that installation work perfectly on a 64bit system, that would already be a tremendous help since people could then use GimPhoto with 64bit Ubuntu.

    I'll have to play around with it some more. Perhaps it was a mistake to *FIRST* remove Gimp altogether. That's what I did, before installing GimPhoto ....

    ReplyDelete
  73. INSTALLING . GIMPHOTO . ON . 64 BIT . UBUNTU

    Okay, I'm running GimPhoto on my 64bit Ubuntu 9.04 as of today. In order to get it to run, you have to use the force command, like this:

    sudo dpkg --force-architecture -i /media/Downloads/GimPhoto/gimphoto_1.4.3_i386.deb

    The correct path/location is critical. I always download everything into a "Downloads" folder. Then I create a folder for the app, followed by moving the app. to that folder. Keep this in mind for your own installation ... your path has to be 100% correct.

    NOTICE: I did *NOT* uninstall or remove any Gimp Version 2.6 files at all. I can actually use both, GimPhoto as well as Gimp 2.6 separately and both of them open up with my settings intact.

    SADLY: GimPhoto is not for me, as I can't really tell the difference between GimPhoto and the Gimp Version 2.6 since I still end up with separate windows, one for each open image. What I need is a programm like Paint Shop Pro, Adobe Photoshop, Corel Draw, etc. In other words, a programm that opens once ... in full screen mode if desired ... followed by containing all open images within that one single main window. GimPhoto runs perfectly on my 64bit Ubuntu now, but I honestly can't really tell the difference between the two since their look and feel is so very much alike. GimPhoto appears to look a little bit cleaner ???

    And yes, I did follow the instructions which ask to ignore the file in the bin folder, or rather, requesting the use of the installed file at this location instead:

    /usr/local/gimphoto/gimphoto.sh

    I've also played around with JPHOTOBRUSHPRO (http://www.jphotobrushpro.com/) which does exactly what I need for an image editor to do. But sadly the development appears to have been discontinued as of 2004. Couldn't get a response from the developer either. It's pretty neat to check out though, all besed on 100% pure Java. Bummer, I hope that someone comes up with a SINGLE WINDOW application for Linux soon, because having Windows/Images all over the place all of the time, especially when working with 10+ images at the same time, ist just plain maddening !!! Have a great Weekend.

    ReplyDelete
  74. Siegfried,
    Thanks for your info about installing GimPhoto for Linux under 64bit system, i will include it on the GimPhoto for Linux install instructions.

    for single unified interface for GimPhoto under Liinux, you can try using XNest, maybe not perfect but as for temporary solution, it's ok :)

    for using XNest with GIMP or GimPhoto, follow this link:
    http://ubuntuforums.org/showthread.php?t=240543
    http://xubuntu.wordpress.com/2006/09/05/howto-run-gimp-in-one-window/
    http://www.anoobsguide.com/2009/02/how-to-make-gimp-one-window-in-ubuntu.html

    ReplyDelete
  75. I cannot get past the font loading screen. It crashes out every time using the latest version.

    ReplyDelete
  76. Anonymous,
    can you give me more detailed info about what OS do you use? XP, Vista or Linux? what error message? i assume you using Windows and install GimPhoto and GimPad then for first check, try to run GimPhoto (don't run GimPad) this is for define where is the problem at GimPad or GimPhoto.

    ReplyDelete
  77. Hello,
    Every filter or effect I attempt to apply to an image straight away gives me an error message saying that the particular plug in crashed. I have re started a couple of times now, and it keeps doing it. Why?

    ReplyDelete
  78. Anonymous,
    please be more specific about what OS do you use? do you use GimPhoto with GimPad? what error message do you get? what particular plugin that is crashed?

    maybe you can try to run GimPhoto (don't run GimPad) and try to use filter or effect.

    ReplyDelete
  79. Hi again.

    Well, for all of those looking for the "perfect" Gimp Windowed integration solution, this blog from one of the main Gimp Developers may prove to be interesting. I always figured that it was just a matter of time, just a few more months now.

    https://www.blogger.com/comment.g?blogID=28919981&postID=2372750348813464628&page=1

    Do take a look at it. It's very interesting and if you click on - SHOW ORIGINAL POST - at the top, then you'll get to see a bunch of screenshots too.
    Greetings from Germany

    ReplyDelete
  80. Ooooops, sorry about that ...
    It appears that the images are no longer working in the blog. That's a real shame too because some of those graphical ideas were truly awesome !!! :(

    ReplyDelete
  81. YES - The images are working!
    Click on the big orange line at the top that says:
    "GIMP redux, single‐window mode"

    ReplyDelete
  82. Siegfried,
    afaik the GIMP single window implementation was not MDI style like Photoshop but it more toward TAB style like browser such as Firefox or Chrome. I think it not as flexible as MDI windowing style.

    ReplyDelete
  83. Am unable to download from Camera scouce,nor able to print. do I need to update my recent download?
    Derek stanley. stanley.d3@sky.com

    ReplyDelete
  84. castawaybcn1/10/09 10:40 PM

    Hi, thanks for such a good piece of software (I like the Gimp but sometimes it gets on my nerves...) I have a little problem with GimPad though.

    I installed (in this order, after uninstalling Gimp) GimPhoto 1.4.3 and GimPad 1.1 on WIN XP SP2

    Unprivileged users cannot run GimPad, program ends unexpectedly.
    However, GimPhoto runs fine for the same user and Admin can run both.

    Anyone else has found a solution to this?

    ReplyDelete
  85. Derek Stanley,
    actually if your camera support TWAIN32 or your camera storage can be auto detected as removable drive, then it will be recognized by GimPhoto.

    for printing problem, maybe you can be more specific about your OS and what error message do you got?

    ReplyDelete
  86. castawaybcn,
    Thank's for your kind words :) for "sometimes it gets on my nerves..." i know what you mean, because i also experience it, even that is the main reason why i develop GimPhoto :)

    yes GimPad need admin privilege because GimPad need specific Win32 API that can take over control for be able to manage other apps windows (GimPhoto windows)

    but you can use Steel Run As (free), get it from:
    http://www.steelsonic.com/steelrunas.htm

    with it we can run specific software as admin user but also hide admin password from users.

    ReplyDelete
  87. This has probably already been reported but I really can't stress enough how I would like my tools and layers dialogs to always be on top while working on an image. It is inconvenient to have to constantly alt-tab or click the tab in the taskbar in order to access them.

    ReplyDelete
  88. pxlspy01,
    i assume you using Windows and only use GimPhoto but not using GimPad. You can try to use GimPad, then your tools and layers dialogs will always on top.

    ReplyDelete
  89. I installed gimphoto...installed from deb package, worked fine...installed where it said it would/where i expected it would....when i try to open a jpg, png, gif....anything besides a .xcf.....i get a plug-in error..unable to open image....

    i also have gimp 2.6.7 and gimp 2.7 installed and everything works fine....some how i dont think that gimphoto(2.4) is looking in other gimp folders because it created its own .gimp-2.4 folder in my home folder..

    any ideas whats happening here....im running ubuntu 9.04

    ReplyDelete
  90. David,
    try to run GimPhoto from gimphoto.sh rather from /bin/gimphoto, maybe it happened because ubuntu 9.04 using newer shared libraries that used by 2.6 but not compatible with 2.4.

    ReplyDelete
  91. zenith, thanks...works perfect now :)... also great work with GimPhoto..i love it. now i have specialized configuration for gimp, for painting and photomanipulation..thanks again.

    ReplyDelete
  92. Hi!
    I'm running Kubuntu Karmic and when trying to launch I get...
    /usr/local/gimphoto/bin/gimphoto: error while loading shared libraries: libart_lgpl_2.so.2: cannot open shared object file: No such file or directory

    Have I done something wrong?

    ReplyDelete
  93. Andy,
    try to run /usr/local/gimphoto/gimphoto.sh

    ReplyDelete
  94. Hi Zenith,
    Same response I'm afraid.

    ReplyDelete
  95. Andy,
    sorry but i don't have Karmic system to test it by myself. Maybe you can try to get GimPhoto deb package from GetDeb.net because it is different from this site deb package.

    ReplyDelete
  96. gimpad wont close ever when you click close and the toolbar does not show up ever again after you close it

    ReplyDelete
  97. Anonymous,
    please read installation instructions more carefully again, specially at section about deleting old gimp 2.4 preferences at /documents and settings/users folder even if you already uninstall gimp. (gimphoto will use that old preferences and that preferences usually not compatible with gimpad)

    ReplyDelete
  98. I was using GimPhoto on 32 bit XP and everything was working, but now I got a new computer with 64 bit Windows 7 and I'm having problems.

    I mainly use this program for the "save for web" feature. Now when I go to open an image, the program will crash (not responding) after I open a folder with lots of images in it (about 500 images). If I leave the computer for about 5 minutes it will finally load, but then after doing anything like trying to save for web it will crash for another 5 minutes.

    I have 4 gig RAM, Windows 7 64 bit.

    ReplyDelete
  99. Update on the last post... I think it is all OK now, I did not restart my computer after installing GimPhoto and I think that caused the problem.

    ReplyDelete
  100. I have a question - which version of Python Gimphoto use? And under which distro it was compiled?

    P.S. Sorry for my bad English.

    ReplyDelete
  101. Fliker09,
    sorry but i'm not remember if i compile it with python support, if it enabled then should the same version with GIMP 2.4.3.

    GimPhoto for Linux compiled using Linux Mint Daryna based on Ubuntu Feisty Fawn (before Hardy Heron)

    ReplyDelete
  102. I encountered the libgimpui-2.0-0.dll problem, the suggestion was to reinstall the GimPhoto, I did it but still the problem remains and I can't do anything, can't work att all.
    Do you have a solution to this problem, as seen in Google it's a common problem.

    Thank you in advance.

    Ben

    benblasto@gmail.com

    ReplyDelete
  103. Ben,
    maybe you can be more specific what OS do you use?

    ReplyDelete
  104. gimpphotot just deleted ALL my environment variables when installing! This is totally unacceptable!

    ReplyDelete
  105. Tim,
    can you be more specific about your OS version?

    ReplyDelete
  106. Hey guys, i've just installed .deb file on my Mint 9.0

    I run it, and i select a filter.. like "flames"

    And it comes a error message:

    Could not execute plug-in "flame"
    (/usr/local/gimphoto/lib/gimp/2.0/plug-ins/flame)
    because GIMP is using an older version of the plug-in protocol.

    I have also installed gimp 2.6.. what have i to do?

    ReplyDelete
  107. Anonymous,

    try to run GimPhoto from /usr/local/gimphoto/gimphoto.sh (DON'T run it from /usr/local/gimphoto/bin/gimphoto)

    ReplyDelete
  108. I used Gimp Image Editor for the first time today to crop some old pics that i scanned and saved to my desktop, this worked beautifully and i was really happy!! so i have now tried to use this programme on some recent pics that i have saved in my pictures but i cant open them as Gimp is trying to open them and not my normal Fspot photo manager?? i then get an error saying opening'home/kim/pictures'failed:is a directory...i now cant access any of my pictures or any other documents for that matter, can anyone help me reset my f spot as the default picture opener??? thanks heaps....Kim

    ReplyDelete
  109. Anonymous,
    this is Gimphoto site, not GIMP site :)
    GIMP site is at http://www.gimp.org

    for setting FSpot as default pic viewer, follow:
    http://enli.co.cc/tutorials/setting-default-application-in-ubuntu/

    ReplyDelete
  110. Does not fully work with newest ubuntu, some .so's are missing. same with 64bits deb.

    get fixed ones at openartisthq.org/debian/maverick & maverick64

    ReplyDelete
  111. Thanks Anonymous,
    i will replace Gimphoto for Linux package with OpenArtist Maverick Gimphoto packages.

    ReplyDelete
  112. I wanted to try gimphoto on my ubuntu 10.10 but when I install it it showed an error...:( here's the error:


    error processing /home/francis/Downloads/gimphoto_1.4.3-1_i386.deb (--install):
    parse error, in file '/var/lib/dpkg/tmp.ci/control' near line 11 package 'gimphoto':
    duplicate value for `Architecture' field
    Errors were encountered while processing:
    /home/francis/Downloads/gimphoto_1.4.3-1_i386.deb

    ReplyDelete
  113. Anonymous,
    try to download Gimphoto for Linux using OpenArtist Maverick packages (this is that compatible with Ubuntu 10.10).

    Check Gimphoto Linux Download section for more info, at:
    http://www.gimphoto.com/2008/02/gimphoto-for-linux.html

    ReplyDelete
  114. Error en el archivo
    http://openartisthq.org/debian/maverick64/gimphoto_1.4.3-1_amd64.deb

    No se puede installar.

    Al parecer es un error de creación.

    ReplyDelete
  115. RjveraL,
    i'm sorry but for error on gimphoto packages from OpenArtist, please contact OpenArtist development team members.

    ReplyDelete
  116. Installed GP on our Ubuntu Linux system and very very pleased. Great job. So I decided to download the Windows 7 version of GimPhoto followed by GimPad. Installed both flawlessly, but immediately got VIRUS warning from McAfee. Please check this out and tell me if it is a false positive or real. Thanks!

    McAfee detected and automatically removed a virus from your PC. No further action is required.

    About the Virus
    Detected: Artemis!729CAE817452 (Virus)
    Quarantined From: C:\Program files (x86)\GimPhoto 1.4.3\lib\gimp\2.0\plug-ins\pspi.exe

    ReplyDelete
  117. Dave,
    i'm really sorry about the virus and thanks for your information about it.

    pspi.exe is GIMP plugin for using Photoshop .8bf plugins and i got the binary from this site:
    http://tml.pp.fi/gimp/pspi.html

    but i never got virus warning from any anti virus software that i use, including Avast.

    ReplyDelete
  118. Hi,

    I am running Fedora 15b with GNOME 3. I want to install GimPhoto, since GIMP itself is totally alien to me, I've always been used to Photoshop.

    Anyway, I downloaded the "All Linux Distro" version, enabled the "run as application" checkbox... and nothing happens. I doubleclick - nothing. I right-click + Open - nothing. I even tried to run it with another application (Software Install and also Archive Manager), but still nothing happens.

    I really wish I could use GimPhoto, but I cannot, for the life of me, figure out how to install it.

    Any change this could end up in a repository we could use with YAM? (respectively, a deb repository we could use with aptitude...)

    Thanks!

    muiiio

    ReplyDelete
  119. Anonymous,
    I'm sorry for not be able to provide RPM package because i only Ubuntu based distro and don't have Fedora system.

    but you can use ALIEN to convert Gimphoto DEB package to RPM, just follow this tutorial:
    http://linuxpoison.blogspot.com/2010/05/how-to-convert-between-packages-deb-rpm.html

    ReplyDelete
  120. Gimphoto 1.4.3 for Ubuntu Maverick (DEB)
    http://openartisthq.org/debian/maverick/gimphoto_1.4.3-1_i386.deb


    FAILS in Ubuntu Natty (11.04) with

    "The Package is of bad quality"

    "The installation of a package which violates the quality standards isn't allowed. This could cause serious problems on your computer. Please contact the person or organisation who provided this package file and include the details beneath."


    details excerpt

    E: gimphoto: wrong-file-owner-uid-or-gid opt/gimphoto/ ...

    ReplyDelete
  121. clicking the ubuntu 10.10 or later DEB spawns Ubuntu Software Center as expected

    mashing install prompts for authentication as expected

    amidst install: FAIL

    options
    [ OK ] [ Ignore and install ]

    Given the gravity of the warning I shall NOT be clicking the second button.

    ReplyDelete
  122. @ Dave

    To be sure your crapware antivirus is not issuing a heuristics FALSE positive please feed the executable to anubis

    http://anubis.iseclab.org/

    And post the results URL

    ReplyDelete
  123. cuz I can,
    Thanks for your information about Gimphoto package error for Ubuntu 11.04.

    I still don't have Ubuntu 11.04 system so i can't testing it and for now i'm still very busy with my life and work :(

    really sorry, i hope i can fix it soon.

    ReplyDelete
  124. Why is that when I downloaded GimPad I was sent a virus? My computer stopped it thankfully but I do believe this is an issue that needs to be fixed

    ReplyDelete
  125. Anonymous,
    What AV that you use?
    because i use AVAST, AVIRA and Rising AV with Gimpad installer without a problem.

    ReplyDelete
  126. hmmm .. still multiple windows on this Kubuntu 10.04 LTS ( 64 )
    deleted, purged uninstalled, reinstalled .. ran from correct dir.. still multi-windowed :(
    Oh well. thanks anyway

    ReplyDelete
  127. Anonymous,
    i'm sorry but i already put BIG Warning on Linux Download page about that Gimphoto still CAN'T support MDI because:

    GIMP based on GTK and there is NO MDI support for GTK system.

    ReplyDelete
  128. There was an error parsing the menu definition from toolbox-menu.xml: Failed to open file '/usr/local/gimphoto/share/gimp/2.0/menus/toolbox-menu.xml': No such file or directory

    How do I fix this?
    mars_rover@rocketmail.com

    ReplyDelete
  129. http://infidelsunited.com/pics/GimPhoto.png There was a virus in my download from this site. Just thought you'd like to know!

    ReplyDelete
  130. Why do I keep getting some error like..:

    zealouscrop.exe - Entry Point Not Found
    ========================================
    The procedure entry point libiconv_set_relocation_prefix could not be located in the dynamic link library iconv.dll.
    ----------------------------------------------

    It does load IF I hold down enter to get through a load of other errors but it's just annoying. Help?

    ReplyDelete
  131. Fiesh,
    maybe your download is not complete, please try to download again and reinstall Gimphoto.

    maybe you can give more detailed info about what your OS? Win XP, Vista or Win 7?

    ReplyDelete
  132. I am running gimphoto on Ubuntu 11.10 currently and when ever I try to copy or cut an object it closes and exits on me, even when I use the menu cut and copy. Any suggestions?

    ReplyDelete
  133. Anonymous,
    i'm sorry but Gimphoto still not updated to latest Ubuntu version, maybe you can try compile it from its source :)

    ReplyDelete
  134. This comment has been removed by the author.

    ReplyDelete
  135. I open gimpshop and when it gets to fonts,it says
    (Not Responding) And i click it and a message says
    Close the program or wait for it to respond.
    I've tried opening it millions of times and this
    allways happens. Help.

    ReplyDelete
  136. monica,
    i'm sorry but this site is GIMPHOTO site and NOT gimpshop site :)
    if you interested to use GIMPHOTO for Windows then try to download it from http://www.gimphoto.com/2008/02/gimphoto-for-windows.html
    and follow the installation instructions :)

    ReplyDelete
  137. This app donesn't run,all is ok then it gets to fonts,it says this can take a while and then it crashes.
    Help!

    ReplyDelete
  138. She Wolf,
    if you have problems with Gimphoto installer then maybe you can try Gimphoto portable version, you can download it from here: (and follow installation instructions)
    http://www.gimphoto.com/2008/02/gimphoto-portable.html

    ReplyDelete
  139. I am Using gimp's latest version on a Windows 8 PC, when i try to scale an image by entering values for height and width the image doesn't scale, I have scale the image manually. I tried re-installing too but it didn't work. I am facing the same issue in gimp shop too.

    ReplyDelete
  140. Hi Pradeep,
    i'm sorry but this is NOT a GIMP nor GIMPSHOP website, this is GIMPHOTO website :)
    for GIMP official website then you can go to:
    http://www.gimp.org/

    ReplyDelete
  141. I basically can not get this program to work correctly at all. I can not move the main window where my image is open, so i have to move the tool boxes around. I can not select any menu choice on the image window either, so i cant do any editing. Sometimes the tool options box is stuck towards the middle of the screen and i have to open/close the program a few times to be able to move it. If i open anything from any of the menus, example.. tools or xtns, i cant not close it. the "X" or the close options do not respond.... I am running the gimpad like it says i am on windows 7. what am i doing wrong.

    ReplyDelete
  142. Anonymous,
    If you ever install GIMP 2.4 or Gimpshop (even if you already uninstall it), for Windows 7 users
    - please check it under C:\Users\(Your_User_Name)\
    - DELETE or RENAME folder .gimp-2.4 or .gimp-2.2
    (mostly error happened because of this)

    if the errors is persist then try using Gimphoto Portable, download it from:
    http://www.gimphoto.com/2008/02/gimphoto-portable.html

    ReplyDelete
  143. BUG:
    When you install GimpPhoto and GimpPad it deletes everything from your System Path variable and replaces it with the path to GimpPhoto and GimpPad.

    ReplyDelete
  144. Anonymous,
    What your OS ? Gimphoto and Gimpad tested on Windows XP and Windows 7 without a problem.
    But if you doubt then try Gimphoto Portable version first, download it from:
    http://www.gimphoto.com/2008/02/gimphoto-portable.html

    ReplyDelete
  145. I have found GimPhoto for me.
    But have the problem that it does not run clean. It jerky in between and then hangs up.
    Then I can finish the progam only via the task manager. It will not happen.

    ReplyDelete
  146. Mc Lawrie,
    What OS that you use?
    Maybe you can try to using Gimphoto Portable, download it from here:
    http://www.gimphoto.com/2008/02/gimphoto-portable.html

    ReplyDelete
  147. Pressure sensitive hyperpen's return is really slow (an example, I draw a line, but it shows up a second later). This bug happens with GimPhoto 1.4.3 + GimPad 1.1 Btw everything works ultra fast with Gimp 2.8 , but it has less features, so I'm hoping that this gets fixed :/

    ReplyDelete
  148. Egmonts,
    maybe you can try it using Wacom Tablet?
    or waiting for Gimphoto next version that based on GIMP 2.8 :)

    ReplyDelete
  149. Gimphoto replaced my whole PATH environment variable with just its folder locations - not appended to it. I'm running Windows 8.1.

    ReplyDelete
  150. aesqe,
    I'm sorry for your troubles with Gimphoto :(
    Gimphoto only tested with Windows XP, Vista and 7 so it's not ready for Windows 8 or 8.1.
    So if you use Windows 8 or 8.1, it's more safe to try Gimphoto Portable :)
    http://www.gimphoto.com/2008/02/gimphoto-portable.html

    ReplyDelete
  151. I installed the 64bit (that's what I have, 64x Linux Mint (Rebecca)) version

    When I go to /usr/local/gimphoto and do sh gimphoto.sh I get this errro:

    /usr/local/gimphoto/bin/gimphoto: error while loading shared libraries: libart_lgpl_2.so.2: cannot open shared object file: No such file or directory

    I see on the internet that I am not the only one with this problem. Is there a way to fix this?

    ReplyDelete
  152. Wijnand,
    Gimphoto for Linux only tested using 32 bit version of Ubuntu from 10.04 to 14.04 or Linux Mint 17.
    for error "cannot open shared object", maybe you can try to install the file using package from:
    https://packages.debian.org/wheezy/libart-2.0-2

    ReplyDelete
  153. I tried it, but it didn't work!

    ReplyDelete
  154. Wijnand,
    It looks like your problems because library "ia32-libs" that required by 64 bit installer is not available anymore since Ubuntu 13.10...

    to solve the issues, just follow this link: (i will add this info in Linux Download Page)
    http://stackoverflow.com/questions/23182765/how-to-install-ia32-libs-in-ubuntu-14-04-lts-trusty-tahr

    ReplyDelete
  155. Zenith, I installed ia32-libs, but it doesn't work. It still gives the same error (libart_lgpl_2.so.2)

    ReplyDelete
  156. Wijnand,
    do you install 64bit version? if you using Ubuntu 14.04 then try install using 32bit version because since Ubuntu 13.10 is multi-architecture... no need anymore to install additional 32 bit library.

    ReplyDelete
  157. I have installed the 64bit, but also tried the 32bit. Both don't work, by the way: I use Linux Mint.

    ReplyDelete
  158. Where is the location of file "libart_lgpl_2.so.2" ? Is already included on PATH ?
    "These might be installed in /usr/lib32 on your machine. You'll need to add these directories to your LD_LIBRARY_PATH environment variable"

    bash$ export LD_LIBRARY_PATH=/usr/lib32:$LD_LIBRARY_PATH

    from:
    https://forums.adobe.com/thread/395537

    ReplyDelete
  159. I get this error now: error while loading shared libraries: libart_lgpl_2.so.2: wrong ELF class: ELFCLASS64

    it has to do with x64 VS x32, but is this saying I have a x64 libart_lgpl_2.so.2 that is x64 or the program or...?

    ReplyDelete
  160. it worked Zenith.. this reaction:

    Wijnand,
    That's error message mean that Gimphoto is 32 bit app that try to use libart_lgpl_2.so.2 64 bit version.
    If you already success installed ia-32libs then libart_lgpl_2.so.2 32 bit is located at folder /usr/lib32.
    STEP TO FIX:
    1. Check file libart_lgpl_2.so.2 is exist at usr/lib32
    2. ADD LIBRARY PATH TO /usr/lib32 using this command:
    bash$ export LD_LIBRARY_PATH=/usr/lib32:$LD_LIBRARY_PATH

    Installing 32bit app. Wrong ELF Class: ELFCLASS64
    http://ubuntuforums.org/showthread.php?t=1815027

    ReplyDelete
  161. If Gimphoto 24.1 window is NOT maximized, but I would like to maximize the window of a picture within Gimphoto, this maximized picture window doesn't fit in the available size of the Gimphoto/Gimpad window.

    ReplyDelete
  162. If Gimphoto 24.1 gets minimized, also the tool windows should disappear (without a following klick somewhere).

    ReplyDelete
  163. I had the same problem as Wijnand, hmmm I'm somewhat confused why gimphoto still want to use the 32 bit version of the library when I've downloaded the 64 bit deb package ?

    ReplyDelete
  164. Anonymous,
    i only compile Gimphoto 32 bit version and made 32 bit installer (because i don't have 64 bit system)
    the 64 bit version is made by other Gimphoto users, i don't know if he re-compile it for 64 bit or only re-wrap my 32 bit version to 64 bit installer, i predict it was the later so Gimphoto 64 bit installer still use 32 bit version of library :)

    ReplyDelete
  165. Gimphoto 24.1 Very nice program , however it will not close , I have to end it in task manager . I have only tried it on an old XP pro system.

    ReplyDelete
  166. Hi. I am trying to install Gimphoto, but when I run it it says 'where is X11'. I have deleted both XQuartz and Gimphoto reset computer, re-downloaded both - and still the same error. When I click 'Browse' to search for X11 I get 'No Document can be created'

    Please help
    Colin

    ReplyDelete
  167. Is the program abandoned?

    Thanks for a great program under a free open source license!

    Added a program to a Russian-language site about free software, here is the link (https://xn--90abhbolvbbfgb9aje4m.xn--p1ai/%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D0%BA%D0%B0/%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B8%D0%B5-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%BE%D1%80%D1%8B/gimphoto-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%BE%D1%80-%D1%84%D0%BE%D1%82%D0%BE%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D0%B9.html).

    Will the program no longer develop and receive updates?

    ReplyDelete
  168. [url=https://xn--90abhbolvbbfgb9aje4m.xn--p1ai/%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D0%BA%D0%B0/%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B8%D0%B5-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%BE%D1%80%D1%8B/gimphoto-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%BE%D1%80-%D1%84%D0%BE%D1%82%D0%BE%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D0%B9.html]link[/url]

    ReplyDelete
  169. For some reason Linux Mint 20.2 Cinnamon says that this is NOT a .deb package and cannot install it. Please provide terminal codes instead for a cleaner install. Thanks!

    ReplyDelete
  170. Don’t be afraid to spread your thoughts. You have just made my year a great one! You are clearly an influence in this field so I'm sure many of these concepts probably come easily to someone like yourself however, I am still not understanding some things you’ve written here. What a highly descriptive and well written post. Any more feedback? It would be greatly appreciated.

    무료야설

    ReplyDelete
  171. Pretty component to content. I simply stumbled upon your blog and in accession capital to say that I get in fact enjoyed account your weblog posts. Any way I will be subscribing on your feeds or even I success you access constantly fast.

    타이마사지

    ReplyDelete


  172. สล็อตออนไลน์, เว็บตรง, บ่อย, โบนัส 100%,
    นักพนันสามารถสมัครได้แล้ววันนี้ XOSLOT สมัครสล็อต
    XOSLOT

    ReplyDelete


  173. โปรโมชั่นฝากครั้งเเรก รับโบนัสทันที 50%

    SLOTXO

    ReplyDelete
  174. I like what you guys are up also. Such clever work and reporting! Carry on the excellent works guys I?|ve incorporated you guys to my blogroll. 카지노사이트

    ReplyDelete

  175. I found your blog while I was webs writing to find the above information. Your writing has helped me a lot. I'll write a nice post by quoting your post. 카지노사이트

    ReplyDelete
  176. I am always searching online for articles that can help me. There is obviously a lot to know about this. I think you made some good points in Features also. Keep working, great job ! Two full thumbs up for this magneficent article of yours. I've really enjoyed reading this article today and I think this might be one of the best article that I've read yet. Please, keep this work going on in the same quality. Such an amazing and helpful post this is. I really really love it. It's so good and so awesome. I am just amazed. I hope that you continue to do your work like this in the future also. 토토사이트주소

    ReplyDelete
  177. Nice Blog. Thanks for sharing with us. Such amazing information.

    Things to keep in mind while doing SEO of a new website

    ReplyDelete

  178. Usually I never comment on blogs but your article is so convincing that I never stop myself to say something about it. You’re doing a great job Man, Keep it up
    스포츠토토맨은
    고스톱사이트
    19가이드03

    ReplyDelete
  179. Pretty cool post.It 's really very nice and Useful post.Thanks 메이저놀이터

    ReplyDelete
  180. It’s very informative and you are obviously very knowledgeable in this 토토사이트 총판 처벌

    ReplyDelete
  181. This is my first time visit to your blog and I am very interested in the articles that you serve. Provide enough knowledge for me. Thank you for sharing useful and don't forget, keep sharing useful info: Meticore Review on . Well, this got me thinking what other workouts are good for those of us who find ourselves on the road or have limited equipment options. ProVen Review on . Thanks for picking out the time to discuss this, I feel great about it and love studying more on this topic. It is extremely helpful for me. Thanks for such a valuable help again. It is very good, but look at the information at this address. 카지노사이트

    ReplyDelete
  182. Wohh just what I was looking for, thanks for posting. Positive site 슈어맨2

    ReplyDelete
  183. I think this is an informative post and it is very useful and knowledgeable 슈어맨2

    ReplyDelete
  184. Howdy! I'm grinding away surfing around your blog from my 메이저놀이터검증

    ReplyDelete
  185. I don't normally comment on blogs. But your article is so convincing that I never stop myself saying anything about it. You did a great job. Keep fighting.ดูหนังออนไลน์ฟรี

    ReplyDelete
  186. The Law Cafe เดอะ ลอว์ คาเฟ่I absolutely love your site.. Pleasant colors & theme.

    Did you develop this website yourself? Please reply back as I’m attempting to create my very own website and would like to learn where you got
    this from or just what the theme is named. Kudos!

    ReplyDelete
  187. ดูหนังออนไลน์ฟรีMy partner and I stumbled over here coming from a different web address and thought
    I may as well check things out. I like what I see so i am just following you.
    Look forward to looking into your web page for a second
    time.

    ReplyDelete
  188. ดูซีรีย์ใต้ร่มราชินี18/11/22 9:41 AM

    Thank you for writing such a readable blog. It's amazing. Anyway, you are welcome to visit our blog. ดูซีรีย์ใต้ร่มราชินี

    ReplyDelete
  189. 유익한 웹 사이트를 게시하는 데 아주 좋습니다. 레깅스 룸

    ReplyDelete
  190. 흠 !! 이 블로그는 정말 멋져요. 다낭 카지노

    ReplyDelete
  191. 다시 한 번 감사드립니다. 멋있는. 토토

    ReplyDelete
  192. Thanks for writing such a good article LOCKSMITH YORK

    ReplyDelete
  193. 아주 좋은 블로그 게시물. 다시 한 번 감사드립니다. 멋있는. 토토사이트

    ReplyDelete
  194. You ought to basically fantastic not to mention solid advice, which means notice 메이저사이트

    ReplyDelete
  195. Your website is really cool and this is a great inspiring article. 해외축구중계

    ReplyDelete
  196. 훌륭하게 작성된 기사, 모든 블로거가 동일한 콘텐츠를 제공한다면 인터넷이 훨씬 더 나은 곳이 될 것입니다 .. 먹튀검증

    ReplyDelete

Just Taste ItDownload Now